• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a great amount of damage to your home, which can make it extremely dangerous and possibly fatal. You should take the time to make sure that your windows are in good condition.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames that were previously in use very easily. However when you have double-pane windows that are secured by internal beading it will be more difficult to get rid of the existing panes and install new ones. In this instance it is essential to buy plastic spacers to help the new pane fit into the window frame.

If you're planning to attempt to remove the window panes yourself, it is essential to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the glass to ensure that any fragments of glass fall onto the cloth rather than on the floor, where they could be trodden under and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the property until a professional can come out and repair the window. It also acts as a barrier to prevent any intruders from getting into your home. If the distance between the door and the window is large, you might need to consider a security screen that also has an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time, they are susceptible to a range of issues, including sagging. A sagging window can cause problems with light, draughts or even security. It's crucial to act as soon as you notice your uPVC windows are sagging.

To fix a window that is sagging you can try repositioning the hinges. You'll first need to open the windows to get at the frame. Then, using the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you have repositioned your hinges. If you're satisfied with the fit, tighten the screws to ensure they remain in position.

If you cannot reposition the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to lose their tightness. It is essential to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles can also loosen up. This is typically caused by screws that have become undone over time, but it could also be caused by the handle mechanism wears out. It's relatively simple to fix a loose uPVC handle. You'll first need to close the window and do a test fitting. The corners of the sash should align with the casing joint. If it does not, you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it is important that you take action. Water leaks from windows can not only cause degrading of the structure of your home but also hinder your efforts to control the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix that can be done by any DIY expert. Depending on the severity of the issue is, the old caulking might need to be removed. When it is time to uPVC repair, you must be careful not to over-caulk. This will only make your window more difficult to clean and reduce its energy efficiency.

Check that any drainage holes have no debris in them and that the sill pan has been properly angled to drain away from the window. In more extreme instances, you may need to replace the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to note that if the leak originates from the glass of your double glaze window repair glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open with a breeze, it may be hinges at fault. These are easily repaired by any DIYer who is skilled and can usually be done within a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that are hinged and like any mechanical part they will wear out over time. It is very easy to replace a hinge on a window, but it's simpler if you have someone to help hold the frame.

Make sure that the uPVC hinges open and close in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window a certain way or by improper installation in the factory. Sending us a photo through our website can often solve the issue. We are happy to provide suggestions.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It can also lower the risk of a window sticking and help prevent corrosion. This should be done at least once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. Firstly the hinges, again due to wear and tear may become displaced, which can cause an opening to appear where the sash joins the frame. These can be easily repaired by giving them a thorough clean, however when they're beyond repair, it might be necessary to get them re-aligned or replaced. In addition, the interlock could be unbalanced. This happens on the hinge's side and could require to be cleaned. In some cases it might be necessary to replace the hinges.

The seals may wear out or become damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to stop draughts. Replace the windows made of Upvc with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce the possibility of draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler that can be hung over your window sill. They can help stop cold air from entering and keep your home warm and cozy!

Your upvc window repairs near me windows can continue to provide excellent insulation and security in your home with regular maintenance and conservatory repairs. It is important to remember that all windows eventually become worn out, and it is cheaper to replace them rather than repair them. If you have any problems with your window made of upvc, it's best to consult an expert as soon as possible.